Enter the default factory master code (refer to your packaging, typically 1234 or 123456 ) followed by the or * key.

: After pressing the registration button, place your finger on the sensor or tap your card on the reader.

OneTouch 360° Fingerprint, RFID (Mifare / IC), PIN Code, Backup Key 4 x AA Alkaline 1.5V Batteries (DC 6V) Emergency Power 9V Rectangular Alkaline Battery (External Contacts) Default Master PIN 123456 PIN Code Capacity Up to 10 unique user codes Fingerprint Capacity Up to 100 biometric profiles Initial Setup and Master Configuration

Do not mix old and new batteries, and avoid using cheap zinc-carbon options. Premium heavy-duty alkaline batteries prevent acid leaks and voltage drops. Emergency Power Override

The Complete Troubleshooting and Manual Operation Guide for the Zeus Z3 Digital Lock

First, remove your existing lock. Then, use the included Zeus installation cutting template. Place and tape the template on your door at the correct height. Mark the center points for the main through-hole and the latch bolt hole.

The company that sold or installed your lock can often provide a digital copy.

The Zeus Z3 runs on . When low battery warnings sound, replace all four cells immediately.

: A physical key slot is typically hidden behind a cover on the front panel. Use the provided mechanical keys for direct manual entry.

: Features and specific button sequences (e.g., * vs # ) can vary slightly depending on the reseller or manufacturer version of the Zeus Z3. For model-specific variations, always refer to the original Manual Book provided in your packaging or available on the manufacturer's official support site.