V380 Custom Firmware [cracked] [TESTED]

Even with custom firmware, it is a best practice to put these cameras on an isolated IoT VLAN without internet access. The Risks: Read Before You Flash

Before flashing any files, you must understand that "V380" is not a single device. It is a cloud platform utilized by dozens of manufacturers using various system-on-chip (SoC) architectures.

Proceed at your own risk. Flashing custom firmware or modifying system files can brick your device. This is not an official release. Target Hardware: V380 / V380 Pro WiFi Camera [e.g., Anyka AK3918E, MSC313E] Original Firmware Version: [Insert Version] Objective: v380 custom firmware

Copy the files (usually named rootfs , user , or factory_init.sh ) to the root directory of the SD card.

Listen for unusual boot chimes or check your network router to see if a new IP address or open port (like 554 for RTSP) appears. Even with custom firmware, it is a best

: A tool for extracting H.264 streams directly from cameras that have RTSP disabled. 4. Technical Risks & Constraints I think i bricked my camera, what can i do? #6 - GitHub

If the camera continuously restarts after flashing, the firmware configuration file may specify an incorrect image sensor driver. Access the device via a serial console connection to adjust the hardware environment variables. Proceed at your own risk

What (like Home Assistant or a standalone NVR) do you plan to use with this camera? Share public link