Select the correct COM Port , set the Bits Rate to 115200, and ensure Parity is set to "Even".
: Plug the RS-232 cable into your PC and the STB, but do not turn on the STB yet.
Find the USB-to-Serial adapter (e.g., "USB-Serial CH340") and note the COM port number (e.g., COM3, COM4, or COM11). 3. Configure the STB Upgrade Tool Ver 4.0.2 Open EromUpgrade.exe . Select the number you found in Step 2. stb upgrade tool ver 40 2 work
[Speed] HighSpeed=1 ForceUSB2=0 Timeout=3000
Expand "Ports (COM & LPT)" to identify the COM port number assigned to your cable (e.g., COM3). Launch and Set Up the Tool Upgrade.exe EromUpgrade.exe file. Match these settings within the tool: : Select the COM port identified in step 2. Operate Mode Select Firmware File Select the correct COM Port , set the
: This is a data cable that serves as the communication pipeline between the computer and the receiver.
Select the correct (identified via Windows Device Manager). Set Bits Rate to 115200 and Parity to Even . Set Operate Mode to Upgrade . Select the correct COM Port
It fails miserably for Amlogic or Allwinner hardware.
Watch the progress bar. The software will display "Connect success" or a progress percentage. Wait for the data transmission block to hit .
