Sources for this table:
Press P once. The screen will show "1 ON". Set First ON Time: Use and to set the time you want the device to turn on. Select Days: Press to choose the day(s). Options include: Individual days (Monday, Tuesday, etc.) Monday-Friday Monday-Saturday Saturday-Sunday Monday-Sunday (Every day)
Press again; "1 OFF" appears. Repeat steps 2 and 3 to set the stop time. Press CLOCK to save and exit. 4. Mode Selection (MANUAL Button) Cycle through modes by pressing MANUAL : ON: Permanent power. AUTO: Runs your saved programs. OFF: Power is permanently cut. 🔌 Wiring Instructions sinotimer tm630s manual
Press to select days (e.g., every day, weekdays only, or specific single days). Press H+ , M+ , and S+ to set the exact start time.
The TM630S allows up to 28 independent programs. Each program requires an time and an OFF time. Step 1: Enter Programming Mode Sources for this table: Press P once
The button allows you to temporarily override your program or test your wiring.
Incorrect wiring on the output terminals, or the load exceeds the 30A limit. Select Days: Press to choose the day(s)
What (e.g., water pump, grow light, signage) are you controlling?
Hold down the CLOCK button (🕒) and repeatedly press the D+ button until the correct day of the week appears at the top of the screen.
Ultimate Guide to the Sinotimer TM630S: User Manual, Programming, and Troubleshooting
If you want the timer to power a single appliance (like a water heater) using Channel 1: