Sanyo Mac 1200 Autoclave Manual 2021 Jun 2026

Turn the temperature selection dial to your required target (standard microbiology sterilization is typically set to ).

Wear heat-resistant safety gloves and a face shield when opening the lid to protect against residual steam bursts. Maintenance and Cleaning Protocols

While 121°C is a common standard, always refer to the specific requirements for your materials (e.g., 15–45 minutes depending on the load). 🛠️ Maintenance & Troubleshooting sanyo mac 1200 autoclave manual

Includes an automatic pressure release valve, safety lock for the door, and anti-dry burning protection.

Wait until the cycle is complete, the chamber pressure drops to zero, and the door indicator signals it is safe to unlock. Routine Maintenance and Calibration Turn the temperature selection dial to your required

Check the waste water discharge bottle at the side/back of the unit. Empty it if it exceeds the maximum fill line. Step 2: Loading the Chamber

Mechanical dial timer, usually adjustable from 0 to 60 minutes. Empty it if it exceeds the maximum fill line

Temperature sensors should be calibrated annually or as recommended by the manufacturer to ensure the unit reaches required sterilization levels.

If the chamber is pressurized, forcing the lid can lead to explosive decompression, severe burns, and catastrophic equipment damage.

Set the sterilization timer using the analog dial or digital keys (e.g., 20 minutes). Step 5: Running the Cycle Press the button.

Before starting a cycle, ensure the unit is placed on a level, heat-resistant surface with adequate ventilation. 1. Water Filling Open the lid and remove the sterilization baskets. Pour distilled or deionized water into the chamber.