Proface Wingp Key Code ((hot)) -

Activating WinGP with your purchased key code can be completed during the initial software setup or later via the WinGP configuration utilities. Method A: Activation During Installation

: You can enter the Key Code during the initial installation or later in "Offline Mode" via the system settings. Hardware Binding : For some PC/AT compatible licenses, a physical USB Key (dongle)

If you need to check or update the key code after the initial installation, you can do so in .

Depending on your license model, the "key code" can refer to one of two things: proface wingp key code

What are you currently running?

Without the proper key code, WinGP may operate in trial mode, which often includes screen timeouts or feature limitations.

To activate (the PC-based runtime for Pro-face HMIs), you must enter a specific Serial Number Activating WinGP with your purchased key code can

: If you have a serial number but no key code, you likely need to register your software on the Pro-face Web Registration page. A unique key code will be emailed to you after registration.

: In Trial Mode, the software runs for only up to 3 hours or loses specific communication capabilities until a license is applied.

Install WinGP on your Pro-Face IPC using the GP-Pro EX installer. Depending on your license model, the "key code"

Once deactivated, you can use the exact same key code and serial number to activate WinGP on your new computer.

: For newer digital licenses (e.g., PFXEXWGPF5SA ), WinGP installs as a trial version first. You then use the HMI License Manager software to activate it.

: Provide your regional Pro-face or Schneider Electric representative with the exact part number (e.g., EX-WINGP-IPC).