Phison Mpall V3700e Direct
Verify that the displayed controller information in the grid square matches your ChipGenius diagnostic.
A hexadecimal string representing the physical NAND memory chip manufacturer (e.g., Toshiba, Hynix, SanDisk). 2. Secure the Right Firmware Files
Navigate to the partition settings tab within the configuration window: phison mpall v3700e
These files must perfectly match your Controller Part Number and Flash ID extracted during the diagnostic phase. Place these .bin files directly inside the main MPALL directory. Step 3: Configure the MPALL Ini File
Disable Windows Defender Real-time protection temporarily or add the folder as an exclusion. MPALL requires direct hardware access, which Defender blocks. Verify that the displayed controller information in the
Flashing firmware completely destroys all existing data on the target storage drive. If you need data recovery, use logical scanning software before attempting to flash firmware.
The actual operating system for your USB controller. These usually start with FW (e.g., FW68V101M.BIN ). Secure the Right Firmware Files Navigate to the
"MPTool" stands for Mass Production Tool. Microchip manufacturers like Phison, Silicon Motion (SMI), and Alcor Micro build these proprietary programs for factory assembly lines. Before a USB drive hits retail shelves, an MPTool partitions the memory, tests the NAND flash chips for defects, and flashes the original firmware controller. Why Version v3.70.0E?
If Phison MPALL v3.70.00E throws an error code during execution, utilize these optimization steps:
Note: MPALL can sometimes fix partition blocks and erase errors without a new firmware file, using only the ISP (In-System Programming) default routines. Step-by-Step Configuration and Flashing Guide
When the parameter editor opens, you will build a configuration profile matching your drive profile:
