Note: This page is horribly out of
date.
You can find the current pages for the dm-crypt
project (the Linux kernel part) here:
https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt
and the project page for the command line tool
cryptsetup (with Linux Unified Key
Setup - LUKS) here: https://gitlab.com/cryptsetup/cryptsetup.
Old page:
Device-mapper is a new infrastructure in the Linux 2.6 kernel that provides
a generic way to create virtual layers of block devices that can do different
things on top of real block devices like striping, concatenation, mirroring,
snapshotting, etc... The device-mapper is used by the
LVM2 and
EVMS 2.x tools.
dm-crypt is such a device-mapper target that provides transparent encryption of
block devices using the new Linux 2.6 cryptoapi. The user can basically specify
one of the symmetric ciphers, a key (of any allowed size), an iv generation mode
and then the user can create a new block device in /dev. Writes to this device
will be encrypted and reads decrypted. You can mount your filesystem on it as usual.
But without the key you can't access your data.
It does basically the same as cryptoloop only that it's a much cleaner code and
better suits the need of a block device and has a more flexible configuration
interface. The on-disk format is also compatible. In the future you will be able
to specify other iv generation modes for enhanced security (you'll have to
reencrypt your filesystem though).
I've set up a Wiki.
There's a mailing list at .
If you want to subscribe, use the mailman
web interface or its
archive.
Gmane provides a NNTP interface and also a
web archive
for this mailing list.
There is support for dm-crypt in the latest official kernel
2.6.4
which you can find on kernel.org.
Please use the mirrors for downloads.
There is a HIGHMEM cryptoapi bug in kernels before 2.6.4-rc2, please
upgrade if you were using such a kernel.
The latest version of the native userspace setup tool is cryptsetup 0.1.
Clemens Fruhwirth is maintaining an
enhanced
version of cryptsetup with the LUKS extension that allows you to have an
on-disk block of metadata which is superior to the current mechanism and was
my long term plan anyway but I didn't find the time to implement that yet...
This guide covers how to safely access the software, set it up, and fix common system errors. 1. How to Safely Access MCGS Pro Software
Because MCGS Pro’s kernel is old, Windows 10/11 blocks some installation routines.
Check the official site or contact Kunlun Tongtai’s support – they are responsive to English inquiries for registered users.
Before running the installation setup, ensure your computer meets the following specifications: Minimum Requirement Recommended Requirement Windows 7 (32/64-bit) Windows 10 or Windows 11 (64-bit) Processor Intel Core i3 2.0 GHz Intel Core i5 or higher RAM 8 GB or more Hard Drive 2 GB free space Solid State Drive (SSD) with 5 GB free Display 1024 x 768 resolution 1920 x 1080 (Full HD) 4. Step-by-Step Installation Guide
What or message are you currently seeing? Which Windows operating system version are you running?
: Projects can be transferred to the HMI via a USB flash drive (FAT32) or directly through an Ethernet/serial connection. MCGS HMI Software "ENGLISH VERION 2025"
While the lure of "free" is strong, the professional standard is to utilize official channels. Kunlun Tongtai often provides demo versions or lite editions for learning. For students and hobbyists, using these official trial versions ensures a learning experience that aligns with industry standards. For businesses, the cost of a legitimate license is an investment in reliability and cybersecurity. Conclusion
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
📍 [Insert your clean link or say “Search ‘MCGS Pro 7.7 full’ on PLC forum”]
The on-disk layouts used by the current 2.6 cryptoloop are supported by dm-crypt.
Cryptoloop also uses cryptoapi so the name of the ciphers are the same. Cryptoloop also
supports ECB and CBC mode. Use <cipher>-ecb and
<cipher>-plain accordingly with dm-crypt. If you didn't
explicitly specify either -ecb or -cbc before you don't need it now, the default plain
IV generation will be used. There will be additional (incompatible, but more secure) possibilites
in the future because the unhashed sector number as IV is too predictible.
You'll need to figure out how your passphrase was turned into a key to use for losetup.
There are several patches floating around doing things differently. But usually cryptsetup
will provide a working solution to recreate the same key from your passphrase.
If you want to migrate from 2.4 cryptoloop please take a look at Clemens Fruhwirth's
Cryptoloop
Migration Guide. He describes the differences between 2.4 and 2.6 cryptoapi (or basically
the bugs in 2.4 cryptoapi...). If you need to cut the key size you can use the -s
option instead of playing with dd.
(BTW: Clemens has a i586 optimized version of the aes and serpent cipher on his page,
about twice as fast as the kernel implementation.)
Why dm-crypt?
Originally it started as a fun project because I wanted to play with the new Linux 2.6 internals.
I got a lot of great help from the device-mapper guys at Sistina (now Redhat). Thank you very
much!
It turned out that this implementation worked great and is very clean compared to the hacked
loop device. The device-mapper core provides much better facilities to stack block devices.
dm-crypt uses mempools to assure we never run into out-of-memory deadlocks when allocating
buffers.
Also the device-mapper configuration interface provides much more flexibility than the losetup
ioctl. And you can create as many devices as you want with any names you want and combine them
with other dm targets. Online device resizing is also possible, e.g. if you use dm-crypt on top
of a logical volume. There might perhaps even be LVM or EVMS support for device encryption
in the future.
This guide covers how to safely access the software, set it up, and fix common system errors. 1. How to Safely Access MCGS Pro Software
Because MCGS Pro’s kernel is old, Windows 10/11 blocks some installation routines.
Check the official site or contact Kunlun Tongtai’s support – they are responsive to English inquiries for registered users. mcgs pro hmi software free download fix
Before running the installation setup, ensure your computer meets the following specifications: Minimum Requirement Recommended Requirement Windows 7 (32/64-bit) Windows 10 or Windows 11 (64-bit) Processor Intel Core i3 2.0 GHz Intel Core i5 or higher RAM 8 GB or more Hard Drive 2 GB free space Solid State Drive (SSD) with 5 GB free Display 1024 x 768 resolution 1920 x 1080 (Full HD) 4. Step-by-Step Installation Guide
What or message are you currently seeing? Which Windows operating system version are you running? This guide covers how to safely access the
: Projects can be transferred to the HMI via a USB flash drive (FAT32) or directly through an Ethernet/serial connection. MCGS HMI Software "ENGLISH VERION 2025"
While the lure of "free" is strong, the professional standard is to utilize official channels. Kunlun Tongtai often provides demo versions or lite editions for learning. For students and hobbyists, using these official trial versions ensures a learning experience that aligns with industry standards. For businesses, the cost of a legitimate license is an investment in reliability and cybersecurity. Conclusion Check the official site or contact Kunlun Tongtai’s
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
📍 [Insert your clean link or say “Search ‘MCGS Pro 7.7 full’ on PLC forum”]
Please contact the mailing list: dm-crypt@saout.de. Or in case there is a problem with the mailing list, me: .