Maintenance Box Resetter For Epson L6170 Jun 2026

When this box becomes full, the printer stops working, displaying an error message that the "maintenance box is at the end of its service life." This is where a becomes an essential, money-saving tool.

WICReset can also be used to reset the maintenance box counter if the physical chip replacement method is not an option for you.

During normal operation, your Epson L6170 performs automatic printhead cleanings and borderless printing flush cycles. These processes consume ink that never reaches the page. The maintenance box (specifically model for the L6170) houses a highly absorbent sponge designed to catch and collect this excess waste ink, preventing it from leaking into the printer's internal machinery. How Does the Printer Know It Is Full?

So, a resetter is only useful if you reuse an old box or buy a compatible (non-Epson) box that doesn’t auto-reset. maintenance box resetter for epson l6170

Are you planning to or buy replacement pads ?

Double‑check that the resetter chip is correctly seated and that you did not accidentally bend any pins. Also, try entering service mode and performing an additional counter reset using the printer’s built‑in menu. If the problem persists, the resetter may be defective or incompatible.

Align the metal prongs of your hardware resetter tool with the metal contacts on the chip. Press the resetter firmly against the chip contacts. Watch the built-in LED light on the resetter tool: When this box becomes full, the printer stops

I can provide targeted troubleshooting steps or direct you to compatible parts. Share public link

The term "maintenance box resetter" can refer to two completely different tools. Understanding the difference is essential before you proceed.

The LED light on the resetter will flash red initially, then turn a solid green to confirm a successful reset. These processes consume ink that never reaches the page

Unscrew the single retaining screw and slide the T04D1 box out.

Connect the pins of the chip resetter to the contact points on the chip.