Phillips #1 screwdriver, plastic spudger (or guitar pick), fresh alkaline batteries (no lithium or rechargeable), and your verified keypad.
If your new keypad does not immediately revive your safe, check the following variables: No Lights or Beeps Check battery orientation.
until you have tested the new installation successfully multiple times.
Rubbing alcohol and a microfiber cloth (for cleaning the safe surface) Step-by-Step Installation Process intellok safe keypad replacement verified
If your replacement kit includes a new mounting plate, unscrew the old plate from the safe door and attach the new one using the existing screw holes. Ensure the center wire pass-through hole is completely clear and aligned. Step 4: Connect the New Keypad
: Commercial-grade security with robust EMP resistance.
The keypad remains completely dead despite installing brand-new batteries. Phillips #1 screwdriver, plastic spudger (or guitar pick),
Secure the new keypad to the door and install fresh 9V alkaline batteries (Duracell or Energizer are highly recommended for safe locks). Maintaining Your New Keypad
when pressing buttons (after verifying the 9V battery is new).
Perform this test at least three consecutive times with the door open. Rubbing alcohol and a microfiber cloth (for cleaning
Keypad beeps or lights up, but the safe will not unlock.
Alternatively, some models require you to slide the keypad straight up to release it from its mounting tabs. 2. Disconnect the Wire Harness
|
Get To Know Us
|
Shipping and Store Policies
|
Need Help?
|