| Problem | Solution | |---------|----------| | Drive not detected | Reinstall driver, use USB 2.0 port | | Error "Load FW Fail" | Firmware missing – check folder for .bin files | | Capacity shows 0 MB | Bad blocks – reduce capacity setting | | Status "Failed" (red) | Retry with "Normal" format, disable bad block check | | Windows doesn't recognize after | Reformat with Diskpart or Windows Disk Management |
You must run the program with full Administrative privileges.
: Open FCMpTools.exe . When prompted with a "Product Type" window, simply click OK to keep default settings. firstchip fc1178 fc1179 mptools v1052 install
Look for a subfolder named Driver or look for files named InstallDriver.exe .
: Replaces corrupted controller code with a fresh copy to restore hardware communication. | Problem | Solution | |---------|----------| | Drive
Re-plug the drive after closing the MPTool. If still not visible, check Disk Management—the drive may need a new volume created (right-click → New Simple Volume).
Use a tool like 7-Zip or WinRAR to extract the folder to your local drive (preferably directly to C:\FirstChip_V1052 ). Avoid deep subfolders or folder names with non-English characters. Step 2: Configure Windows Compatibility Open the extracted folder. Look for a subfolder named Driver or look
How to Repair USB Drives with FirstChip FC1178/FC1179 MpTools V1.0.5.2
Select the checkbox corresponding to your detected drive slot. Click the large button at the top of the interface.
Click the button located at the top-right corner of the interface.
Pre-installation preparation