Fanuc Series Oitf Plus Programming Manual [upd] ★ No Ads

G76 P021060 Q0040 R0.002 G76 X0.92 Z-1.5 P0400 Q0120 F0.0833 Use code with caution.

| G-Code | Function | Description | | :--- | :--- | :--- | | | Rapid Positioning | Moves the tool at the machine's maximum rapid traverse rate to a specified point. | | G01 | Linear Interpolation | Performs a cutting feed move in a straight line at a programmed feed rate (F). | | G02 | Circular Interpolation (CW) | Moves the tool along a clockwise circular arc. | | G03 | Circular Interpolation (CCW) | Moves the tool along a counter-clockwise circular arc. | | G04 | Dwell | Pauses the program execution for a specified amount of time (X or P address). | | G17, G18, G19 | Plane Selection | Select the XY, ZX, or YZ plane for circular interpolation and cutter compensation. | | G20 / G21 | Inch / Metric Input | Converts all coordinate values to inches or millimeters (mm), respectively. | | G27 | Reference Point Return Check | Checks if the tool is precisely at the reference return position. | | G28 | Automatic Return to Reference Point | Moves the tool through an intermediate point to the machine's reference point. | | G40, G41, G42 | Cutter Compensation | Cancels, activates left, or activates right-side cutter compensation. | | G50 | Coordinate System Setting / Max Spindle Speed | Sets a local coordinate system or the maximum spindle speed limit. | | G70, G71, G72, G76 | Turning Cycles | Canned cycles for finishing (G70), roughing (G71), facing (G72), and threading (G76) on a lathe. | | G90 / G94 | Turning Cycles | Simple cycles for outer/inner diameter roughing (G90) and facing (G94). | | G96 / G97 | Constant Surface Speed Control | Activates constant surface speed (CSS) mode (G96) or constant spindle speed (RPM) mode (G97). | | G98 / G99 | Feed Per Minute / Feed Per Revolution | Sets the feed rate in mm/min (G98) or mm/rev (G99). |

G-codes dictate how the tool moves. They can be modal (remaining active until cancelled) or non-modal (active only in the block in which they are programmed). Here are the most common G-codes you will find in the programming manual: fanuc series oitf plus programming manual

Are you programming for a or a mill (machining center) ? Share public link

Structure every program with identical safe start blocks, tool changes, and park positions. G76 P021060 Q0040 R0

The Fanuc Series OITF Plus programming manual is a comprehensive guide that provides detailed information on how to program and operate the system. By understanding the manual, users can improve productivity, increase accuracy, and enhance troubleshooting. The manual is an essential resource for programmers, operators, and maintenance personnel who need to get the most out of the Fanuc Series OITF Plus.

The control follows standard ISO programming, though the manual outlines subtle differences across G-code systems A, B, and C (with System A being the default for standard turning). Description Rapid Positioning Moves axes at maximum machine traverse speed. G01 Linear Interpolation Moves axes in a straight line at a specified feed rate ( G02 / G03 Circular Interpolation Executes clockwise or counterclockwise arcs. G50 Maximum Spindle Speed | | G02 | Circular Interpolation (CW) |

Macro B allows programmers to use variables, mathematical calculations, and conditional logic. This turns static code into dynamic, parametric programs.

The is the essential technical reference document used by machinists, programmers, and engineers to write, edit, and optimize G-code programs for modern lathe and turning systems . The "T" designation indicates its specific tuning for Lathe/Turning systems , distinguishing it from the "M" (Machining Center/Milling) variant. The FANUC Series 0i-F Plus platform combines traditional ISO G-code control with advanced shop-floor conversational systems like MANUAL GUIDE i to reduce cycle times and achieve nano-level surface finishes. Core Structure of the 0i-TF Plus Programming Manual