Evoko Liso Factory Reset Verified [updated] 🏆 💫

You are relocating the unit to a different meeting room or network. Administrator login credentials have been forgotten. Verified Method: How to Factory Reset Evoko Liso

Reviving the Room Controller: A Verified Deep Dive into the Evoko Liso Factory Reset

Once completed, the device will prompt you to remove the USB drive and reboot into a factory-fresh state. Post-Reset Configuration Checklist

Unplug the PoE (Power over Ethernet) cable or the 12V power adapter from the back of the Evoko Liso. evoko liso factory reset verified

You cannot simply use a blank USB; you must create a bootable "flashing" drive using imaging software like balenaEtcher .

Tap the screen to wake the device. Tap the small gear icon or the "Admin" option, usually located in a corner of the screen.

: Find the specific room assigned to the Evoko Liso you want to reset. You are relocating the unit to a different

: Click Yes on the confirmation prompt to send a remote wipe command. Expected Result

: On your server, ensure the Device Registration Timer is active (found under Global Settings) to allow the newly reset device to connect.

Essentially, the device will behave as if it has just been turned on for the very first time. The unit will reboot, display the initial setup screen, and require a full configuration. When Should You Factory Reset? Tap the small gear icon or the "Admin"

: Highly effective for resolving persistent "red light" errors or "freaking out" calendar displays often seen in older firmware versions. Hardware Requirements : Requires a FAT-formatted USB stick (4GB or larger recommended). Hardware Conflicts Kingston brand USB drives

Here’s an interesting, verified write-up on performing a factory reset on the Evoko Liso (a high-end conference room scheduling panel):