: Reset the printer’s non-volatile memory to factory settings.
: Ensure the version of AdjProg.exe exactly matches your printer model (e.g., an L3110 resetter will not work on an L3210).
From the list of options, select (or similar phrasing). A new window will appear:
Many high-volume users drill a small hole in the printer casing, pull out the internal waste ink tube, and route it into an external plastic bottle. This permanently eliminates the risk of internal flooding. Crucial Safety Warning: Malware and Fake Tools epson adjprogexe updated
There is no official public download page from Epson for AdjProg. The tool is leaked from service centers. However, over the years, distinct versions have emerged. Here’s a timeline of notable releases:
Once you have a verified, updated version:
: When a printer displays a "Service Required" error (meaning the waste ink pads are full), this tool can reset the internal counter to allow continued printing. : Reset the printer’s non-volatile memory to factory
A long list of technical options will appear. Scroll down to the section. Select Waste ink pad counter and click OK . Step 3: Check and Reset the Counter
The physical pads may not even be full, but the printer's software blocks any further printing until the counter is reset. How the Updated Adjprog.exe Software Works
An updated version of the Epson Adjustment Program ( adjprog.exe ) has recently been detected. This utility is commonly used for servicing Epson printers—performing tasks such as ink pad reset, waste ink counter清零, and other maintenance adjustments not available through standard drivers. A new window will appear: Many high-volume users
Understanding Epson AdjProg.exe: The Ultimate Guide to Resitting Your Printer’s Waste Ink Pad Counter
Close the Adjustment Program, turn your printer off, wait 10 seconds, and then turn it back on. The service error should be cleared, and your printer should function normally again. You can optionally re-run the program and check the waste ink pad counter to confirm that the value has been reset to zero.
Fine-tunes the physical alignment of the printhead to eliminate banding.