Min: 5.0 bar (ensures minimum oil delivery)Max: Varies per model rating Control Selection (Loc / Etn)Run Configuration (Aut / cnt)
Easy-to-navigate interface for monitoring operational data and changing settings.
Selects, applies, and registers adjusted values into the memory bank. The Three-Row Display Matrix
Managing these features requires navigating the specific button sequences outlined in the Delcos 1000 Quick Reference Guide Accessing the Menu : Press and hold the buttons simultaneously for to enter the main selection menu (requires an access code). Adjusting Values Enter/Confirm keys to cycle through and change values. Stand-by Awareness : If the green is flashing, the unit is in stand-by mode and can start automatically as soon as pressure drops below the cut-in point. Maintenance Tracking compair delcos 1000 bis manual top
Safety shutdown triggered by a combined input error. Core Parametric Adjustments
Ensure the red stop button is disengaged.
: Clears minor warning messages and instantly returns the display to standard live pressure and temperature readings. Min: 5
: From the standard "Pressure & Temperature" display, press and hold the UP and DOWN arrow buttons simultaneously for 5 seconds.
While the specific manual is elusive, general information from related DELCOS models and available documentation describes the system's core features:
: Adjust soft-stop times, maximum starts per hour, and pressure setpoints. Adjusting Values Enter/Confirm keys to cycle through and
Flashing indicates standby mode (motor can start automatically); On indicates the drive motor is running 1.2.1. LED B (On): Compressor is operating under load.
Critical faults instantly trip the motor contactors to protect the air end. Investigate high temperatures for low coolant fluid, blocked cooler faces, or a broken fan circuit. Once you fix the physical issue, clear the latching logic on the control panel by pressing the [ Θcap theta ] key before restarting the system.
A maintenance window is approaching, or a non-critical operational issue has been detected.