Caraflo V200 Shower Instructions -

Open all drain-down valves on the underside of your caravan chassis to evacuate remaining water from the shower supply lines. Troubleshooting Common Issues Potential Cause Inlets are reversed or supply is blocked

This is critical for the Caraflo V200. Wrap the shower arm threads clockwise. Do not use 5+ wraps; the V200’s swivel nut is deep but sensitive to overtension.

Use a spanner to unscrew the brass cartridge from the valve body. caraflo v200 shower instructions

Mount the riser rail to the wall using the provided screws, ensuring it is vertically plumb. Operating Instructions

Align the V200 valve horizontally or vertically depending on your space. Open all drain-down valves on the underside of

Insert the brass threaded tails into the supply lines, ensuring you use appropriate plumbing washers or thread-seal tape to create a watertight seal.

Move the handle toward the red indicator for hotter water and toward the blue indicator for colder water. Do not use 5+ wraps; the V200’s swivel

Ensure the hot supply line is routed to the designated hot inlet side (typically marked with a red indicator). Step 3: Mount the Plates and Tails Slide the chrome backplates over the brass threaded tails.

Ensure your supply pipes are protruding from the wall at exactly 150mm centers.